Juniper JUNOS 22.4 R2-S2

An Execution with Unnecessary Privileges vulnerability in the User Interface (UI) of Juniper Networks Junos OS and Junos OS Evolved allows a local, low-privileged attacker to gain root privileges, thus compromising the system. When a configuration that allows unsigned Python op scripts is present on the device, a non-root user is able to execute malicious op scripts as a root-equivalent user, leading to privilege escalation.  This issue affects Junos OS:  * All versions before 22.4R3-S7,  * from 23.2 before 23.2R2-S4,  * from 23.4 before 23.4R2-S6, * from 24.2 before 24.2R1-S2, 24.2R2,  * from 24.4 before 24.4R1-S2, 24.4R2;  Junos OS Evolved:  * All versions before 22.4R3-S7-EVO,  * from 23.2 before 23.2R2-S4-EVO,  * from 23.4 before 23.4R2-S6-EVO, * from 24.2 before 24.2R2-EVO,  * from 24.4 before 24.4R1-S1-EVO, 24.4R2-EVO.

Published: 2026-04-09T21:24:50.485Z
Updated: 2026-04-16T15:14:18.212Z

An OS Command Injection vulnerability in the CLI processing of Juniper Networks Junos OS and Junos OS Evolved allows a local, high-privileged attacker executing specific, crafted CLI commands to inject arbitrary shell commands as root, leading to a complete compromise of the system. Certain 'set system' commands, when executed with crafted arguments, are not properly sanitized, allowing for arbitrary shell injection. These shell commands are executed as root, potentially allowing for complete control of the vulnerable system. This issue affects: Junos OS:  * all versions before 22.4R3-S8,  * from 23.2 before 23.2R2-S5,  * from 23.4 before 23.4R2-S7,  * from 24.2 before 24.2R2-S2,  * from 24.4 before 24.4R2,  * from 25.2 before 25.2R2;  Junos OS Evolved:  * all versions before 22.4R3-S8-EVO,  * from 23.2 before 23.2R2-S5-EVO,  * from 23.4 before 23.4R2-S7-EVO,  * from 24.2 before 24.2R2-S2-EVO,  * from 24.4 before 24.4R2-EVO,  * from 25.2 before 25.2R1-S1-EVO, 25.2R2-EVO.

Published: 2026-04-09T21:38:52.747Z
Updated: 2026-04-22T14:48:22.085Z

An Improper Check for Unusual or Exceptional Conditions vulnerability in the flow daemon (flowd) of Juniper Networks Junos OS on SRX Series allows an attacker sending a specific, malformed ICMPv6 packet to cause the srxpfe process to crash and restart. Continued receipt and processing of these packets will repeatedly crash the srxpfe process and sustain the Denial of Service (DoS) condition. During NAT64 translation, receipt of a specific, malformed ICMPv6 packet destined to the device will cause the srxpfe process to crash and restart. This issue cannot be triggered using IPv4 nor other IPv6 traffic. This issue affects Junos OS on SRX Series: * all versions before 21.2R3-S10, * all versions of 21.3, * from 21.4 before 21.4R3-S12, * all versions of 22.1, * from 22.2 before 22.2R3-S8, * all versions of 22.4, * from 22.4 before 22.4R3-S9, * from 23.2 before 23.2R2-S6, * from 23.4 before 23.4R2-S7, * from 24.2 before 24.2R2-S3, * from 24.4 before 24.4R2-S3, * from 25.2 before 25.2R1-S2, 25.2R2.

Published: 2026-04-09T21:38:08.493Z
Updated: 2026-04-10T13:56:16.375Z

A Missing Release of Memory after Effective Lifetime vulnerability in the DHCP daemon (jdhcpd) of Juniper Networks Junos OS on MX Series, allows an adjacent, unauthenticated attacker to cause a memory leak, that will eventually cause a complete Denial-of-Service (DoS). In a DHCPv6 over PPPoE, or DHCPv6 over VLAN with Active lease query or Bulk lease query scenario, every subscriber logout will leak a small amount of memory. When all available memory has been exhausted, jdhcpd will crash and restart which causes a complete service impact until the process has recovered. The memory usage of jdhcpd can be monitored with: user@host> show system processes extensive | match jdhcpd This issue affects Junos OS: * all versions before 22.4R3-S1, * 23.2 versions before 23.2R2, * 23.4 versions before 23.4R2.

Published: 2026-04-09T21:29:45.496Z
Updated: 2026-04-13T18:06:19.824Z

A Missing Release of Memory after Effective Lifetime vulnerability in the Layer 2 Address Learning Daemon (l2ald) of Juniper Networks Junos OS and Junos OS Evolved allows an adjacent, unauthenticated attacker to cause a memory leak ultimately leading to a Denial of Service (DoS). In an EVPN-MPLS scenario, routes learned from remote multi-homed Provider Edge (PE) devices are programmed as ESI routes. Due to a logic issue in the l2ald memory management, memory allocated for these routes is not released when there is churn for these routes. As a result, memory leaks in the l2ald process which will ultimately lead to a crash and restart of l2ald. Use the following command to monitor the memory consumption by l2ald: user@device> show system process extensive | match "PID|l2ald" This issue affects: Junos OS: * all versions before 22.4R3-S5, * 23.2 versions before 23.2R2-S3, * 23.4 versions before 23.4R2-S4, * 24.2 versions before 24.2R2; Junos OS Evolved: * all versions before 22.4R3-S5-EVO, * 23.2 versions before 23.2R2-S3-EVO, * 23.4 versions before 23.4R2-S4-EVO, * 24.2 versions before 24.2R2-EVO.

Published: 2026-04-09T21:29:20.534Z
Updated: 2026-04-13T18:06:19.950Z