Meatmeet Pro Wifi & Bluetooth Meat Thermometer Firmware

The ESP32 system on a chip (SoC) that powers the Meatmeet basestation device was found to lack Secure Boot. The Secure Boot feature ensures that only authenticated software can execute on the device. The Secure Boot process forms a chain of trust by verifying all mutable software entities involved in the Application Startup Flow. As a result, an attacker with physical access to the device can flash modified firmware to the device, resulting in the execution of malicious code upon startup.

Published: 2025-12-10T00:00:00.000Z
Updated: 2025-12-11T20:09:25.004Z

An unauthenticated attacker within proximity of the Meatmeet device can issue several commands over Bluetooth Low Energy (BLE) to these devices which would result in a Denial of Service. These commands include: shutdown, restart, clear config. Clear config would disassociate the current device from its user and would require re-configuration to re-enable the device. As a result, the end user would be unable to receive updates from the Meatmeet base station which communicates with the cloud services until the device had been fixed or turned back on.

Published: 2025-12-10T00:00:00.000Z
Updated: 2026-07-05T01:24:04.484Z

The firmware on the basestation of the Meatmeet is not encrypted. An adversary with physical access to the Meatmeet device can disassemble the device, connect over UART, and retrieve the firmware dump for analysis. Within the NVS partition they may discover the credentials of the current and previous Wi-Fi networks. This information could be used to gain unauthorized access to the victim's Wi-Fi network.

Published: 2025-12-10T00:00:00.000Z
Updated: 2025-12-11T20:35:34.867Z

An unauthenticated attacker within proximity of the Meatmeet device can perform an unauthorized Over The Air (OTA) firmware upgrade using Bluetooth Low Energy (BLE), resulting in the firmware on the device being overwritten with the attacker's code. As the device does not perform checks on upgrades, this results in Remote Code Execution (RCE) and the victim losing complete access to the Meatmeet.

Published: 2025-12-10T00:00:00.000Z
Updated: 2025-12-11T20:35:44.766Z

The Meatmeet Pro was found to be shipped with hardcoded Wi-Fi credentials in the firmware, for the test network it was developed on. If an attacker retrieved this, and found the physical location of the Wi-Fi network, they could gain unauthorized access to the Wi-Fi network of the vendor. Additionally, if an attacker were located in close physical proximity to the device when it was first set up, they may be able to force the device to auto-connect to an attacker-controlled access point by setting the SSID and password to the same as which was found in the firmware file.

Published: 2025-12-10T00:00:00.000Z
Updated: 2025-12-11T20:35:51.332Z