Juniper EX4600

An Improper Check for Unusual or Exceptional Conditions vulnerability in the packet forwarding engine (pfe) of Juniper Networks Junos OS on specific EX and QFX Series devices allow an unauthenticated, adjacent attacker to cause a complete Denial of Service (DoS). On EX4k, and QFX5k platforms configured as service-provider edge devices, if L2PT is enabled on the UNI and VSTP is enabled on NNI in VXLAN scenarios, receiving VSTP BPDUs on UNI leads to packet buffer allocation failures, resulting in the device to not pass traffic anymore until it is manually recovered with a restart.This issue affects Junos OS: * 24.4 releases before 24.4R2, * 25.2 releases before 25.2R1-S1, 25.2R2. This issue does not affect Junos OS releases before 24.4R1.

Published: 2026-04-09T21:35:48.123Z
Updated: 2026-04-10T14:10:08.812Z

An Incorrect Initialization of Resource vulnerability in the packet forwarding engine (pfe) of Juniper Networks Junos OS on specific EX Series and QFX Series device allows an unauthenticated, network-based attacker to cause an integrity impact to downstream networks. When the same family inet or inet6 filter is applied on an IRB interface and on a physical interface as egress filter on EX4100, EX4400, EX4650 and QFX5120 devices, only one of the two filters will be applied, which can lead to traffic being sent out one of these interfaces which should have been blocked. This issue affects Junos OS on EX Series and QFX Series: * 23.4 version 23.4R2-S6, * 24.2 version 24.2R2-S3. No other Junos OS versions are affected.

Published: 2026-04-09T21:28:56.625Z
Updated: 2026-04-13T18:06:20.091Z

An Improper Check for Unusual or Exceptional Conditions vulnerability in the packet forwarding engine (PFE) of Juniper Networks Junos OS on EX4k Series and QFX5k Series platforms allows an unauthenticated network-adjacent attacker flapping an interface to cause traffic between VXLAN Network Identifiers (VNIs) to drop, leading to a Denial of Service (DoS). On all EX4k and QFX5k platforms, a link flap in an EVPN-VXLAN configuration Link Aggregation Group (LAG) results in Inter-VNI traffic dropping when there are multiple load-balanced next-hop routes for the same destination. This issue is only applicable to systems that support EVPN-VXLAN Virtual Port-Link Aggregation Groups (VPLAG), such as the QFX5110, QFX5120, QFX5200, EX4100, EX4300, EX4400, and EX4650. Service can only be restored by restarting the affected FPC via the 'request chassis fpc restart slot <slot-number>' command. This issue affects Junos OS on EX4k and QFX5k Series:  * all versions before 21.4R3-S12,  * all versions of 22.2 * from 22.4 before 22.4R3-S8,  * from 23.2 before 23.2R2-S5,  * from 23.4 before 23.4R2-S5,  * from 24.2 before 24.2R2-S3, * from 24.4 before 24.4R2.

Published: 2026-01-15T20:23:29.682Z
Updated: 2026-01-15T20:51:57.933Z

A NULL Pointer Dereference vulnerability in the chassis daemon (chassisd) of Juniper Networks Junos OS on MX, SRX and EX Series allows a local attacker with low privileges to cause a Denial-of-Service (DoS). When a user executes the 'show chassis' command with specifically crafted options, chassisd will crash and restart. Due to this all components but the Routing Engine (RE) in the chassis are reinitialized, which leads to a complete service outage, which the system automatically recovers from. This issue affects: Junos OS on MX, SRX and EX Series, except MX10000 Series and MX304:  * all versions before 22.4R3-S8, * 23.2 versions before 23.2R2-S5, * 23.4 versions before 23.4R2-S6, * 24.2 versions before 24.2R2-S2, * 24.4 versions before 24.4R2.

Published: 2026-01-15T20:16:22.617Z
Updated: 2026-03-16T18:18:52.683Z

An Origin Validation Error vulnerability in an insufficient protected file of Juniper Networks Junos OS on EX4600 Series and QFX5000 Series allows an unauthenticated attacker with physical access to the device to create a backdoor which allows complete control of the system. When a device isn't configured with a root password, an attacker can modify a specific file. It's contents will be added to the Junos configuration of the device without being visible. This allows for the addition of any configuration unknown to the actual operator, which includes users, IP addresses and other configuration which could allow unauthorized access to the device. This exploit is persistent across reboots and even zeroization. The indicator of compromise is a modified /etc/config/<platform>-defaults[-flex].conf file. Review that file for unexpected configuration statements, or compare it to an unmodified version which can be extracted from the original Juniper software image file. For details on the extraction procedure please contact Juniper Technical Assistance Center (JTAC). To restore the device to a trusted initial configuration the system needs to be reinstalled from physical media.  This issue affects Junos OS on EX4600 Series and QFX5000 Series: * All versions before 21.4R3, * 22.2 versions before 22.2R3-S3.

Published: 2025-10-09T15:43:23.110Z
Updated: 2025-10-09T19:49:29.942Z