Juniper JUNOS 21.2 R1

An Improper Check for Unusual or Exceptional Conditions vulnerability in the flow daemon (flowd) of Juniper Networks Junos OS on SRX Series allows an attacker sending a specific, malformed ICMPv6 packet to cause the srxpfe process to crash and restart. Continued receipt and processing of these packets will repeatedly crash the srxpfe process and sustain the Denial of Service (DoS) condition. During NAT64 translation, receipt of a specific, malformed ICMPv6 packet destined to the device will cause the srxpfe process to crash and restart. This issue cannot be triggered using IPv4 nor other IPv6 traffic. This issue affects Junos OS on SRX Series: * all versions before 21.2R3-S10, * all versions of 21.3, * from 21.4 before 21.4R3-S12, * all versions of 22.1, * from 22.2 before 22.2R3-S8, * all versions of 22.4, * from 22.4 before 22.4R3-S9, * from 23.2 before 23.2R2-S6, * from 23.4 before 23.4R2-S7, * from 24.2 before 24.2R2-S3, * from 24.4 before 24.4R2-S3, * from 25.2 before 25.2R1-S2, 25.2R2.

Published: 2026-04-09T21:38:08.493Z
Updated: 2026-04-10T13:56:16.375Z

A Time-of-check Time-of-use (TOCTOU) Race Condition vulnerability in the method to collect FPC Ethernet firmware statistics of Juniper Networks Junos OS on MX10k Series allows a local, low-privileged attacker executing the 'show system firmware' CLI command to cause an LC480 or LC2101 line card to reset. On MX10k Series systems with LC480 or LC2101 line cards, repeated execution of the 'show system firmware' CLI command can cause the line card to crash and restart. Additionally, some time after the line card crashes, chassisd may also crash and restart, generating a core dump.This issue affects Junos OS on MX10k Series:  * all versions before 21.2R3-S10,  * from 21.4 before 21.4R3-S9,  * from 22.2 before 22.2R3-S7,  * from 22.4 before 22.4R3-S6,  * from 23.2 before 23.2R2-S2,  * from 23.4 before 23.4R2-S3,  * from 24.2 before 24.2R2.

Published: 2026-01-15T20:24:20.087Z
Updated: 2026-01-15T20:50:28.949Z

A Loop with Unreachable Exit Condition ('Infinite Loop') vulnerability in the SIP application layer gateway (ALG) of Juniper Networks Junos OS on SRX Series and MX Series with MX-SPC3 or MS-MPC allows an unauthenticated network-based attacker sending specific SIP messages over TCP to crash the flow management process, leading to a Denial of Service (DoS). On SRX Series, and MX Series with MX-SPC3 or MS-MPC service cards, receipt of multiple SIP messages causes the SIP headers to be parsed incorrectly, eventually causing a continuous loop and leading to a watchdog timer expiration, crashing the flowd process on SRX Series and MX Series with MX-SPC3, or mspmand process on MX Series with MS-MPC. This issue only occurs over TCP. SIP messages sent over UDP cannot trigger this issue. This issue affects Junos OS on SRX Series and MX Series with MX-SPC3 and MS-MPC: * all versions before 21.2R3-S10,  * from 21.4 before 21.4R3-S12,  * from 22.4 before 22.4R3-S8,  * from 23.2 before 23.2R2-S5,  * from 23.4 before 23.4R2-S6,  * from 24.2 before 24.2R2-S3,  * from 24.4 before 24.4R2-S1,  * from 25.2 before 25.2R1-S1, 25.2R2.

Published: 2026-01-15T20:19:22.158Z
Updated: 2026-01-16T16:26:02.071Z

An Improper Handling of Exceptional Conditions vulnerability in packet processing of Juniper Networks Junos OS allows an unauthenticated, network-adjacent attacker sending a specifically malformed ICMP packet to cause an FPC to crash and restart, resulting in a Denial of Service (DoS). When an ICMP packet is received with a specifically malformed IP header value, the FPC receiving the packet crashes and restarts. Due to the specific type of malformed packet, adjacent upstream routers would not forward the packet, limiting the attack surface to adjacent networks. This issue only affects ICMPv4. ICMPv6 is not vulnerable to this issue. This issue does not affect AFT-based line cards such as the MPC10, MPC11, LC4800, LC9600, and MX304. This issue affects Junos OS:  * all versions before 21.2R3-S9,  * from 21.4 before 21.4R3-S10,  * from 22.2 before 22.2R3-S7,  * from 22.3 before 22.3R3-S4,  * from 22.4 before 22.4R3-S5,  * from 23.2 before 23.2R2-S3,  * from 23.4 before 23.4R2-S3,  * from 24.2 before 24.2R1-S2, 24.2R2.

Published: 2026-01-15T20:17:24.552Z
Updated: 2026-03-10T22:44:14.198Z

An Incorrect Permission Assignment for Critical Resource vulnerability in the Juniper DHCP daemon (jdhcpd) of Juniper Networks Junos OS and Junos OS Evolved allows a local, low-privileged user to write to the Unix socket used to manage the jdhcpd process, resulting in complete control over the resource. This vulnerability allows any low-privileged user logged into the system to connect to the Unix socket and issue commands to manage the DHCP service, in essence, taking administrative control of the local DHCP server or DHCP relay. This issue affects: Junos OS: * all versions before 21.2R3-S10, * all versions of 22.2, * from 21.4 before 21.4R3-S12, * from 22.4 before 22.4R3-S8, * from 23.2 before 23.2R2-S5, * from 23.4 before 23.4R2-S6, * from 24.2 before 24.2R2-S2, * from 24.4 before 24.4R2, * from 25.2 before 25.2R1-S1, 25.2R2; Junos OS Evolved: * all versions before 22.4R3-S8-EVO, * from 23.2 before 23.2R2-S5-EVO, * from 23.4 before 23.4R2-S6-EVO, * from 24.2 before 24.2R2-S2-EVO, * from 24.4 before 24.4R2-EVO, * from 25.2 before 25.2R1-S1-EVO, 25.2R2-EVO.

Published: 2026-01-15T20:14:43.508Z
Updated: 2026-01-15T21:08:37.387Z