Juniper JUNOS OS Evolved 21.4 R1-S1

An Incorrect Calculation vulnerability in the Layer 2 Control Protocol Daemon (l2cpd) of Juniper Networks Junos OS Evolved allows an unauthenticated network-adjacent attacker flapping the management interface to cause the learning of new MACs over label-switched interfaces (LSI) to stop while generating a flood of logs, resulting in high CPU usage. When the issue is seen, the following log message will be generated: op:1 flag:0x6 mac:xx:xx:xx:xx:xx:xx bd:2 ifl:13302 reason:0(REASON_NONE) i-op:6(INTRNL_OP_HW_FORCE_DELETE) status:10 lstatus:10 err:26(GETIFBD_VALIDATE_FAILED) err-reason 4(IFBD_VALIDATE_FAIL_EPOCH_MISMATCH) hw_wr:0x4 ctxsync:0 fwdsync:0 rtt-id:51 p_ifl:0 fwd_nh:0 svlbnh:0 event:- smask:0x100000000 dmask:0x0 mplsmask 0x1 act:0x5800 extf:0x0 pfe-id 0 hw-notif-ifl 13302 programmed-ifl 4294967295 pseudo-vtep underlay-ifl-idx 0 stack:GET_MAC, ALLOCATE_MAC, GET_IFL, GET_IFF, GET_IFBD, STOP, This issue affects Junos OS Evolved:  * all versions before 21.4R3-S7-EVO,  * from 22.2 before 22.2R3-S4-EVO,  * from 22.3 before 22.3R3-S3-EVO,  * from 22.4 before 22.4R3-S2-EVO,  * from 23.2 before 23.2R2-S1-EVO,  * from 23.4 before 23.4R1-S2-EVO, 23.4R2-EVO.

Published: 2026-01-15T20:23:54.924Z
Updated: 2026-01-15T20:51:32.531Z

An Improper Check for Unusual or Exceptional Conditions vulnerability in the Juniper DHCP service (jdhcpd) of Juniper Networks Junos OS and Junos OS Evolved allows a DHCP client in one subnet to exhaust the address pools of other subnets, leading to a Denial of Service (DoS) on the downstream DHCP server. By default, the DHCP relay agent inserts its own Option 82 information when forwarding client requests, optionally replacing any Option 82 information provided by the client. When a specific DHCP DISCOVER is received in 'forward-only' mode with Option 82, the device should drop the message unless 'trust-option82' is configured. Instead, the DHCP relay forwards these packets to the DHCP server unmodified, which uses up addresses in the DHCP server's address pool, ultimately leading to address pool exhaustion. This issue affects Junos OS:  * all versions before 21.2R3-S10, * from 21.4 before 21.4R3-S12, * all versions of 22.2, * from 22.4 before 22.4R3-S8,  * from 23.2 before 23.2R2-S5,  * from 23.4 before 23.4R2-S6,  * from 24.2 before 24.2R2-S2,  * from 24.4 before 24.4R2,  * from 25.2 before 25.2R1-S1, 25.2R2. Junos OS Evolved: * all versions before 21.4R3-S12-EVO,  * all versions of 22.2-EVO, * from 22.4 before 22.4R3-S8-EVO,  * from 23.2 before 23.2R2-S5-EVO,  * from 23.4 before 23.4R2-S6-EVO,  * from 24.2 before 24.2R2-S2-EVO,  * from 24.4 before 24.4R2-EVO,  * from 25.2 before 25.2R1-S1-EVO, 25.2R2-EVO.

Published: 2026-01-15T20:14:00.582Z
Updated: 2026-01-16T16:27:58.152Z

A Reachable Assertion vulnerability in the Routing Protocol Daemon (rpd) of Juniper Networks Junos OS and Junos OS Evolved allows an unauthenticated, network-based attacker to cause a Denial of Service (DoS). When the device receives a specific BGP UPDATE packet, the rpd crashes and restarts. Continuous receipt of this specific packet will cause a sustained DoS condition. For the issue to occur, BGP multipath with "pause-computation-during-churn" must be configured on the device, and the attacker must send the paths via a BGP UPDATE from a established BGP peer. This issue affects: Junos OS: * All versions before 21.4R3-S7, * from 22.3 before 22.3R3-S3, * from 22.4 before 22.4R3-S5, * from 23.2 before 23.2R2, * from 23.4 before 23.4R2. Junos OS Evolved: * All versions before 21.4R3-S7-EVO, * from 22.3 before 22.3R3-S3-EVO, * from 22.4 before 22.4R3-S5-EVO, * from 23.2 before 23.2R2-EVO, * from 23.4 before 23.4R2-EVO.

Published: 2025-07-11T15:06:49.951Z
Updated: 2025-07-14T16:35:31.358Z

An Improper Check for Unusual or Exceptional Conditions vulnerability in the Routing Protocol Daemon (rpd) of Juniper Networks Junos OS and Junos OS Evolved allows a local, low-privileged attacker to cause a Denial-of-Service (DoS). When a specific "show bgp neighbor" CLI command is run, the rpd cpu utilization rises and eventually causes a crash and restart. Repeated use of this command will cause a sustained DoS condition.  The device is only affected if BGP RIB sharding and update-threading is enabled. This issue affects Junos OS:  * All versions before 21.2R3-S9,  * from 21.4 before 21.4R3-S8, * from 22.2 before 22.2R3-S6,  * from 22.4 before 22.4R3-S2,  * from 23.2 before 23.2R2-S3,  * from 23.4 before 23.4R2. and Junos OS Evolved:  * All versions before 21.2R3-S9-EVO,  * from 21.4-EVO before 21.4R3-S8-EVO,  * from 22.2-EVO before 22.2R3-S6-EVO,  * from 22.4-EVO before 22.4R3-S2-EVO,  * from 23.2-EVO before 23.2R2-S3-EVO,  * from 23.4-EVO before 23.4R2-EVO.

Published: 2025-04-09T20:01:15.300Z
Updated: 2025-04-09T20:35:13.421Z

An Exposure of Sensitive Information to an Unauthorized Actor vulnerability in the User Interface (UI) of Juniper Networks Junos OS and Junos OS Evolved allows a local, low-privileged, authenticated attacker with access to the CLI to access sensitive information.  Through the execution of a specific show mgd command, a user with limited permissions (e.g., a low-privileged login class user) can access sensitive information such as hashed passwords, that can be used to further impact the system. This issue affects Junos OS:  * All versions before 21.4R3-S10, * from 22.2 before 22.2R3-S5, * from 22.4 before 22.4R3-S5,  * from 23.2 before 23.2R2-S3,  * from 23.4 before 23.4R2-S3. Junos OS Evolved:  * All versions before 21.4R3-S10-EVO, * from 22.2-EVO before 22.2R3-S6-EVO,  * from 22.4-EVO before 22.4R3-S5-EVO,  * from 23.2-EVO before 23.2R2-S3-EVO,  * from 23.4-EVO before 23.4R2-S3-EVO.

Published: 2025-04-09T20:00:36.618Z
Updated: 2025-04-09T20:40:40.786Z